Performance of the battery of an electric tricycle
Electric tricycles are subject to relatively strong vibrations during operation, and the reliability of all connections should be assessed. The connectors should have a 'self-locking' function to prevent them from falling off during vibration and pulling. The connection with the battery lugs of the electric tricycle should be Connectors, and solder them firmly with solder, and the connectors and connections should be crimped. If the contact is not firm and the degree is light, poor conduction will occur, causing the line contact part to heat up, the line loss will be large, the output voltage will be low, affecting the motor power, reducing the mileage or unable to ride normally.
If the contact is not strong during driving or charging, an open circuit may occur. When the circuit is open, a strong spark may be generated, which may ignite the explosive gas inside the battery of the electric tricycle, especially the battery of the electric tricycle that has just been charged. Due to the large amount of explosive gas in the battery, and the electric tricycle's battery power is sufficient, the spark is stronger when the circuit is disconnected, and the possibility of explosion is quite large. Lithium batteries should not be charged but not discharged to ensure that they are in good condition. Whether it is a lead-acid battery or a lithium battery, try to prevent the charging time from being too long. The charging time should not exceed 8 hours, and try not to cause violent collision or contact with high-temperature objects. Especially for lithium-ion batteries, it is not correct to charge for too long or to wait until the battery is completely used up each time. Since there is no memory effect in lithium batteries, the amount of each charge will not affect the energy storage effect of the battery. Conversely, if the charging time is too long, the consistency of the battery pack will be affected, thereby affecting the lifespan. And this reduction in lifespan is irreversible, so pay special attention not to charge it too full at one time, it is recommended to charge it to 80%. The same is true for the discharge situation. When charging, there should be a little electricity in the battery. Do not run the electric tricycle without recharging it, which will also affect the battery life. In addition, after the battery is fully discharged, consumers should try to recharge it immediately to avoid charging in a low temperature environment. If the electric bicycle is not used for a long time, it is necessary to remember to recharge it in time. This not only prolongs the service life of the battery, but more importantly, ensures the stability of the battery performance.
Most places have a few choices when it comes to custom electric bike custom electric bicycles distributors, but it can sometimes be difficult to find the right supplier for your needs. The quality of custom electric bicycles is critical to custom electric motorcycle.
Mainbon Group Company Limited. seeks to lead the industry by instilling pride in our customers, creating value for the market and sharing responsibility around the world.
Loyalty programs provide an opportunity to learn the preferences of customers and design communication strategies that will resonate with custom electric bicycles.